Need AX10 Project Help

[HeadHunter]

  Hi new here obviously...have been visiting the website for a long time and mainly looking at pictures and trying to get ideas and its a very inspirational website ...

   I am almost ready to start a FOFF build and want to know what are the most important upgrades that I will have to buy for my AX10.
 
   I already have Futaba 3 PK faast , 3s LiPo with CC Sidewinder and 4600KV Feigao BL motor regular AX10 tranny and shafts gears etc.
   
  I want the Panther Paddle tires and have no idea about what other parts to order especially the drive train area and axles etc.

   I would be very thankful if someone could help me with a small list such as;

    axle upgrades:
    chassis:
    shafts+yolks:
    tranny(stock now):
    motor pinion gear:
     anything I may have missed:


    I would like to use as much stock stuff as possible but if stuff will brake I will upgrade now.

     Thanks very much rc-foff.net and hope to have some nice photos soon !
   
   

   

 

[SlidSlide]

Welcome. I'm glad to hear that you've managed to find useful information from here.

These are what I'm running:

Axle upgrades:

Axle's: 2x Axial Axle's:
- RCP Crawlers AX10 Max Clearance Knuckle
- RCP Crawlers AX10 2 Postion Clockable Axle C
- Axial Racing Aluminum Rear Axle Lock-out
- Axial Racing Straight Axle
- 4link front   4link back

Shocks & springs: TT Ek4 S2 original
Driveshafts: MIP AX10 CVD Drive Shaft Set
Wheels: Axialin wheels (blue rings)
Tires: 2.2 Panther Paddle

Motor: Castle Creations 5700kv
Battery: 3s 2250mah Rhino (25C)
Esc: Mamba Max
Servo: Tower Pro

Pinion: depends on motor and gearing

I also recommend to use 3racing outdrive shaft with MIP drive shafts. This is my fourth axial so I pretty much know the weak points.

[HeadHunter]

Welcome. I'm glad to hear that you've managed to find useful information from here.

These are what I'm running:

Axle upgrades:

Axle's: 2x Axial Axle's:
- RCP Crawlers AX10 Max Clearance Knuckle
- RCP Crawlers AX10 2 Postion Clockable Axle C
- Axial Racing Aluminum Rear Axle Lock-out
- Axial Racing Straight Axle
- 4link front   4link back

Shocks & springs: TT Ek4 S2 original
Driveshafts: MIP AX10 CVD Drive Shaft Set
Wheels: Axialin wheels (blue rings)
Tires: 2.2 Panther Paddle

Motor: Castle Creations 5700kv
Battery: 3s 2250mah Rhino (25C)
Esc: Mamba Max
Servo: Tower Pro

Pinion: depends on motor and gearing

I also recommend to use 3racing outdrive shaft with MIP drive shafts. This is my fourth axial so I pretty much know the weak points.

 Thanks for the great list!!!!

  No slipper clutch needed???

[SlidSlide]

No slipper clutch needed???

Nope.